Adding/Removing WiFi Networks - Fi Series 2

When activating your Fi Series 2 collar you automatically configured your pup's collar to connect to the network used at set up. 

Add additional WiFi networks to track your pup in additional locations where there is no Fi Base. The Fi app can store up to 6 WiFi networks at once. 

If you upgraded from Series 1 to Series 2, please add a wifi network using the instructions below. 

To add a WiFi network:

1. Open the Fi App 
2. Tap your pup's profile on the bottom right hand corner
3. Tap the three stacked lines on the top right
4. Tap WiFi Networks
5. Tap the '+' button in the upper right corner
6. Choose your WiFi Network, and login 
7. Set WiFi location, this will also create a Safe Zone

To edit a WiFi network:

1. Open the Fi App 
2. Tap your pup's profile on the bottom right hand corner
3. Tap the three stacked lines on the top right
4. Tap WiFi Networks
5. Tap into the WiFI network you want to edit
6. You can update the location by moving the WiFi icon over where the WiFi network is located
7. Tap Save when complete

To remove a WiFi network:

1. Open the Fi App 
2. Tap your pup's profile on the bottom right hand corner
3. Tap the three stacked lines on the top right
4. Tap WiFi Networks
5. iOS: Swipe the WiFi Network you'd like to delete to the left and tap Delete to confirm
6. Android: Tap Remove on the top right, tap the red - , and tap Yes to confirm